No products
FLIR CM174 Clamp Meter with Built-In Thermal Imager, 9Hz
New product
The FLIR CM174 600A AC/DC Clamp Meter with Built-In Thermal Imager
50 Items
in stock
More info
The FLIR CM174 Clamp Meter with Built-In Thermal Imager!
Find problems faster with Thermal Imaging
Visually identify electrical issues with the first thermal imaging clamp meter
Confirm your findings.
Verify problems, check load, and validate hot spots
Solve complex electrical issues.
Advanced electrical features: True RMS, LoZ, VFD Mode, Inrush, Smart Diode with Disable
The World's Sixth Sense
The FLIR CM174 Imaging 600A AC/DC Clamp Meter with IGM is the first clamp meter equipped with a built-in thermal imager that can quickly lead you to problems you can’t see with a standard clamp meter.
Featuring Infrared Guided Measurement (IGM) technology, the CM174 visually guides you to the precise location of a potential electrical problem, identifying dangerous and unknown problem areas safely. Confirm your findings with accurate amperage and voltage measurements, and center-point temperature readings. The narrow jaw enables greater accessibility, and its compact form-factor fits easily into your back pocket – so you can have thermal imaging at your fingertips everywhere you go. The FLIR CM174 will quickly become your primary electrical troubleshooting tool.
Find problems faster with Thermal Imaging
- Visually identify electrical issues with the first thermal imaging clamp meter
- Conquer cluttered wires and cables – IGM can quickly guide you in the right direction
- All-in-one tool – carry just one device and always have access to thermal imaging
- Work safely – scan a panel or cabinet for hazards using IGM without direct contact
Confirm your findings.
- Verify problems, check load, and validate hot spots
- Center-point temperature to confirm hot spot
- Amperage and voltage measurements to check the load
- Laser and crosshair pinpoint the location of the problem found in thermal image
Solve complex electrical issues.
- Design and functionality vital to professionals
- Narrow jaw and built-in worklights help you access difficult locations with lighting issues
- Advanced electrical features: True RMS, LoZ, VFD Mode, Inrush, Smart Diode with Disable
- Expandable to 3000 Amps AC with FLIR flex accessories
.jpg)
|
.jpg)
|
In The Box
Manuals/Guides
Manufacturer Specs
| FLIR CM174 General Specifications | ||
| Imaging Detector: | FLIR Lepton ® microbolometer | |
| Thermal Image Resolution: | 4800 pixels (60 × 80) | |
| Field of View (V x H): | 38.6° x 50.0° | |
| Color Palettes: | Iron, Rainbow, Grayscale | |
| Image Frame Rate: | 9Hz | |
| Temperature Measurement: | Center point of thermal image | |
| Temperature Range: | -13°F to 302°F (-25°C to 150°C) | |
| Temperature Distance to Spot Ratio: | 30:1 | |
| Temperature Accuracy: | ±5.4°F (3°C) or ±3% of rdg | |
| Spectral Response: | 8 to 14µm | |
| Temperature Targeting: | Class 1 Laser Pointer and Crosshair on display | |
| Emissivity Settings: | 4 Presets with Custom Adjustment | |
| Electrical Measurements | Range | Basic Accuracy |
| AC/DC Voltage: | 1000V | ±1.0% |
| VFD AC Voltage: | 1000V | ±1.0% |
| LoZ Mode AC Voltage: | 1000V | ±1.0% |
| LoZ Mode DC Voltage: | 1000V | ±1.0% |
| DC Current: | 600.0A | ±2.0% |
| AC Current: | 600.0A | ±2.0% |
| VFD AC Current: | 600.0A | ±2.0% |
| Inrush AC Current: | 600.0A | ±3.0% |
| Inrush AC Current Threshold: | Min 0.5A Integration Time 100ms | |
| Frequency: | 60.00kHz | ±0.1% |
| Resistance: | 6000Ω | ±1.0% |
| Continuity: | 600.0Ω | ±1.0% |
| Capacitance: | 1000µF | ±1.0% |
| Diode: | 1.5V | ±1.5% |
| General information | ||
| Display: | 6000 Count 2.0” (50mm) Color TFT | |
| Jaw Opening: | 1.38" (35mm), 1250MCM | |
| Category Rating: | CAT IV-600V, CAT III-1000V | |
| Certifications: | UL, CE | |
| Battery Type: | 4 x AAA | |
| Warranty: | 10 Years on Product and Detector* | |
| Includes: | Clamp Meter, 4 x AAA Batteries, Premium Silicone Test Leads, Quick Start, User Manual (CD), Extended Warranty Registration Card | |
